Showing results for:

"dynaric"

Dynaric D2400 High Speed Automatic Strapping Machine

The D2400 is a technically innovative strapping machine capable of over 50 strapping cycles per minute. This machine will accept 5mm, 6mm (1/4”) or 9mm (3/8”) strap (no additional parts or costs required). Cycle initiation is by start switch, photo eye or foot bar and the table height can be adjusted from 29.5” to 35.4”. Operating on single phase power, the machine can be plugged in virtually anywhere in your facility.

Equipped with a LCD which can be set to display in six different languages. Capable of being equipped to accept our new XL coils and easy strap feeding, the D2400 minimizes the lost time associated with coil changes.

Dynaric D-2300 Automatic Strapping Machine

The Dynaric D2300 is an operator friendly strapping machine capable of over 48 strapping cycles per minute. This machine will accept 9mm (3/8”) or 12mm (1/2”) strap (only one part is required to change between the two sizes). Cycle initiation is by start switch, table mounted photo switch or foot switch. The table height is set at 800mm (31.5”). Operating on single phase power, the machine can be plugged in virtually anywhere in your facility.

The design of this machine includes rounded corners on the table tops for increased personal safety. The coil is internally mounted, which minimizes required floor space, but utilizes an open design so that the coil is visible. Easy automatic strap feeding, loop kick outs and automatic strap discharge of leftover strap once has coil has been exhausted are just a few of the features which make this a user friendly unit. The strapping material is heat sealed for maximum seal efficiency.

Dynaric D-2100A Fully Automatic Strapping Machine

The D2100A is the operator-less strapping machine utilizing four wide powered belts on the table tops and photo switches. This unit can place up to two straps automatically. The D-2100A will accept 5mm or 6mm strap (no additional parts or costs required). With a cycle time of only 1.2 seconds, this unit can handle the most demanding throughput rates encountered. Cycle initiation is by photo switch, although the unit can be switched to manual and used like a stand alone D-2100 for offline applications.

The D-2100A has a table height of 800mm (31.5”) and operates on 220 volt – 3 phase power. The design of this machine includes rounded corners on the table tops for increased personal safety. The coil is internally mounted, which minimizes required floor space, but utilizes an open design so that the coil is visible. Easy automatic strap feeding, loop kick outs and automatic strap discharge of leftover strap once has coil has been exhausted are just a few of the features which make this a user friendly unit. The strapping material is heat sealed for maximum seal efficiency.

Dynaric D-2100A Fully Automatic Strapping Machine

The D2100A is the operator-less strapping machine utilizing four wide powered belts on the table tops and photo switches. This unit can place up to two straps automatically. The D-2100A will accept 5mm or 6mm strap (no additional parts or costs required). With a cycle time of only 1.2 seconds, this unit can handle the most demanding throughput rates encountered. Cycle initiation is by photo switch, although the unit can be switched to manual and used like a stand alone D-2100 for offline applications.

The D-2100A has a table height of 800mm (31.5”) and operates on 220 volt – 3 phase power. The design of this machine includes rounded corners on the table tops for increased personal safety. The coil is internally mounted, which minimizes required floor space, but utilizes an open design so that the coil is visible. Easy automatic strap feeding, loop kick outs and automatic strap discharge of leftover strap once has coil has been exhausted are just a few of the features which make this a user friendly unit. The strapping material is heat sealed for maximum seal efficiency.

Dynaric DF-30 SeAutomatic Strapping Machine

The DF-30 is an economical, easy to use strapping machine designed to run 1/4 ”– 5/8” strapping. Equipped with externally adjustable strap feed and electronic tension control, the DF-30 is the perfect machine for securing and unitizing outgoing shipments of mail trays or bundled mail. Offering added safety for the operator the DF30 has been redesigned with rounded corners, as well as an audible cycle alert safety signal. An “ACASS” is given when the strap has been inserted into the sealing mechanism prior to tensioning.

Dynaric DF-20 Se Automatic Strapper

The DF-20L is an economical, easy to use strapping machine. Equipped with externally adjustable strap feed and electronic tension control, the DF-20L is the perfect strapper for securing and unitizing outgoing shipments of heavy oversized product. An audible cycle alert safety signal, “ACASS,” is given when the strap has been inserted into the sealing mechanism prior to tensioning. This signal offers added safety for the operator. The DF-20L uses 1/4″, 3/8″, and 1/2″ strapping.

Dynaric DF-11 Automatic Strapping Machine

The DF11 is a proven “workhorse” capable of over 37 strapping cycles per minute. It has a rugged frame and roller table top construction. The arch configurations (height and width) increase independently in 200mm (approximately 8”) increments, so configuring for a specific application is not only desirable – it’s doable. Cycle initiation is by start switch, foot switch or optional roller switch. The DF11 has a table height of 795mm (31.3”). Operating on single phase power, the machine can be plugged in virtually anywhere in your facility. This machine can be ordered to run 9mm (3/8”) or 12mm (1/2) strap. The dispenser is internally located which minimizes the required floor space. The strapping material is heat sealed for maximum seal efficiency.

Dynaric ST-Poli Pneumatic Hand Tool

The pneumatically operated POLI series of friction weld tools are compact and easy to use. With three versions available for light, medium, or high tension, the POLI series can handle any load requirement. The POLI tool is available for use with 3/8″, 1/2″, 5/8″, and 3/4″ wide Ultraband, polypropylene, and polyester strapping. No matter what your strapping requirements are, the POLI series of tools will easily handle them.

Features and Benefits:

  • Operates on 80 psi to 94 psi of air pressure
  • Compact and light weight
  • 3/8, 1/2″ or 3/4 ” plastic strapping can be used
  • Wide tension range to meet any application
  • To help avoid damage to the tool a mounting hanger is included
  • Three month warranty on parts

Dynaric ST Digit Hand Tool

The ST Digit series of tools are compact, easy to use, and versatile for many strapping applications. The Digit tool incorporates some unique features for the tension and sealing areas that allow for precision operation. The ST Digit tool can be used with Ultraband, polypropylene, and polyester strapping from 3/8″ up to 3/4″ in width. Minimal adjustment of the tool is required in order to use different strap sizes. The tool includes one battery and the charger is sold as an option.

Features and Benefits:

  • Delivers approximately 250 polypropylene or 120 polyester cycles per charge
  • Compact and light weight
  • 3/8, 1/2″ or 3/4 ” plastic strapping can be used
  • Wide tension range to meet any application
  • Digital keypad to adjust the tension and sealing time
  • Three month warranty on parts

Dynaric Digit Smart Hand Tool

The Digit Smart tools are compact, easy to use, and versatile for many strapping applications. To maximize seal strength and consistency, the Digit Smart tool has incorporated a number of unique features to the tension and sealing areas. With minimal adjustments the tool can use different strap sizes and strap types including, Ultraband, polypropylene, and polyester strapping from 3/8″ up to 5/8″ in width. The tool includes two batteries and a charger.

Features and Benefits:

  • Delivers approximately 250 polypropylene or 120 polyester cycles per charge
  • Compact and light weight
  • 3/8, 1/2″ or 5/8 ” plastic strapping can be used
  • Wide tension range to meet any application
  • Digital keypad to adjust the tension and sealing time
  • Three month warranty on parts