1200VSC

• Physical: 10ft L x 15.5″W x 29.5-33.5″ H
• Drive: Heavy Duty Gear Motor
• Belting: 2 – 3″ Seamless Belts

960VSC

• Physical: 8ft L x 15.5″W x 29.5-33.5″ H
• Drive: Heavy Duty Gear Motor
• Belting: 2 – 3″ Seamless Belts

720VSC

• Physical: 6ft L x 15.5″W x 29.5-33.5″ H
• Drive: Heavy Duty Gear Motor
• Belting: 2 – 3″ Seamless Belts

480VSC

• Physical: 4ft L x 15.5″W x 29.5-33.5″ H
• Drive: Heavy Duty Gear Motor
• Belting: 2 – 3″ Seamless Belts

Features

• Controls Integrated With Walco Systems Transport Bases or Stand Alone
• Variable Speed Transport
• 3″ Seamless Adjustable Belts
• Shingling End Cap With Cutout
• Adjustable Height 29.5″ to 33.5″
• Durable Powder Coat Finish
• 4 Caster Mobility
• Non Skid Leveling Screws
• Heavy Duty Gear Drive Motor

Options

• Straight Away Delivery Kit
• Stand Alone Drive Motor Control

Walco Systems divert gates offer a reliable solution for your product verification needs.  A lightning fast air-actuated door provides defective or incorrect pieces a route to be removed from the product stream.  Spring loaded rollers allow more rigid pieces to be reliably diverted.  Oversize frames and bearings provide reliable operation, and non proprietary replacement parts ease the cost of service.

Features:

• Quick and Easy Setup
• Variable Speed
• Feeds Wide Variety of Products
• Heavy Gauge Steel Construction
• Sealed Shaft Locking Collar Bearings
• Dry Contact Door Control

Specifications:

• Material Size: Min. 4.5″L, No Min. Width
• Max. Length dependent on material
• Max. 20″W – Material Thickness: 1/4″ Max.
• Electrical: 110 VAC 1-Phase 5 Amp Circuit
• Control: Dry Contact (Low Volt) Standard
• Physical: 6.25″L (9.75″L with In-feed Arms) x 28″W x 13″H

Options:

• Speed Following
• Allows Walco Systems divert gates to follow transports base belt speeds, using one speed control

Walco Systems manufactures vacuum transport bases in 24″, 35″,42″, 65.5″, and 96″ lengths. The VT series vacuum belt transport systems are engineered for accurate product control and registration. Quality components and durability ensure customer satisfaction even for the most demanding applications.

240VT

• Transport Direction: Left to Right or Right to Left
• Material Size: Min. 2″L x 3″W – Max 20″ wide
• Material Thickness: Up To 1/2″ Standard
• Physical: 24″L x 23.5″W x 33-36″ H
• Electrical: 110 VAC Single Phase 10 Amp Circuit

350VT

• Transport Direction: Left to Right or Right to Left
• Material Size: Min. 2″L x 3″W – Max 20″ wide
• Material Thickness: Up To 1/2″ Standard
• Physical: 35″L x 23.5″W x 33-36″ H
• Electrical: 110 VAC Single Phase 10 Amp Circuit

655VT

• Transport Direction: Left to Right or Right to Left
• Material Size: Min. 2″L x 3″W – Max 20″ wide
• Material Thickness: Up To 1/2″ Standard
• Physical: 65.5″L x 23.5″W x 33-36″ H
• Electrical: 110 VAC Single Phase 10 Amp Circuit

Features

• Variable Speed Transport
• Adjustable Belts
• Independent Vacuum Control
• Adjustable In-feed Product Guides
• Feeder Interlock Switch
• Vacuum Belts
• Integrated VSC Conveyor Controls
• 12″ Wide Transport Rollers
• Full Frame Construction
• Adjustable In-feed Rollers

Quality Components

• Heavy Duty Gear Drive Motors
• Commercial Regenerative Blower
• Large Diameter Shafts
• Sealed Shaft Locking Collar Bearings

Options

  Speed Following

  Monitor/Keyboard

The 200RT offers an innovative way to turnover large sheets and delivers them in the same orientation at a right angle.  This allows a variety of processes to be added in-line, dramatically increasing productivity.  Set-up couldn’t be simpler – all standard sheet sizes are to be center justified over the belts, so no adjustment is necessary.  The 200RT utilizes the same rigid construction and easy maintenance that Walco Systems has built its reputation on.

Features

• Quick and Easy Setup
• Non-Proprietary Components
• Variable Speed Transport

Uncompromising Drive Train

• Large Diameter Steel Shafts
• Steel Drive Pulleys
• Steel Rollers
• Sealed Shaft Locking Collar Bearing

Specifications

575ITO

• Material Size: Min. 4″L, Max. 11″W
• Material Thickness: Up to 3/8″
• Physical: 57.5″L x 15.75″W x 31-33″H (Operating), 40-42″H (Physical)
• Electrical: 110VAC Single Phase, 10Amps

The open format of our PK line of transports allows users to easily integrate equipment mounted on gantrys or T-stands.  The same rigid construction used in all Walco Systems machinery is used in the PK series transports.  Available in three standard sizes.

420PK

• Offers the same functionality in a space saving package.
• 42″L x 23.5″W x 33-36″H

655PK

• The original size PK.  Large transport, low price.
• 65.5″L x 23.5″W x 33-36″H

960PK

• The largest PK transport for the largest product.
• 96″L x 23.5″W x 33-36″H

Features

• Full Frame Construction
• Adjustable Infeed Product Guides
• Adjustable Infeed Rollers
• Feeder Interlock Switch
• Variable Speed Transport
• Vacuum Belts
• 12″ Wide Steel Transport Rollers
• Integrated VSC Conveyor Controls
• Independent Vacuum Control

Quality Components

• Heavy Duty Gear Drive Motor
• Large Diameter Shafts
• Commercial Regenerative Blower
• Sealed Shaft Locking Collar Bearings

Print System

Features

• Full Frame Construction
• Adjustable Infeed Product Guides
• Adjustable Infeed Rollers
• Feeder Interlock Switch
• Variable Speed Transport
• Vacuum Belts
• 12″ Wide Steel Transport Rollers
• Integrated VSC Conveyor Controls
• Independent Vacuum Control

Quality Components

• Heavy Duty Gear Drive Motor
• Large Diameter Shafts
• Commercial Regenerative Blower
• Sealed Shaft Locking Collar Bearings

Print System