Showing results for:

"walco"

350D Inkjet Drying System

The series 240D is a complete compact drying system. Quality components featuring durable full frame construction. The upstream product detection provides energy savings and extends transport component life.

Features

  • Full Frame Construction
  • Triple Safety Interlocks With Operator E-Stop
  • Integrated Temperature Control
  • 12″ Wide Steel Transport Rollers
  • Center Table Vacuum
  • Variable Speed Transport
  • Adjustable Heat Belts

IR Dryers

  • Faster Line Speeds
  • Prolonged Lamp Life
  • Utilizes High Efficiency Infrared Lamps

8000 Watt IR

  • Drying Area: 5″ x 16″
  • Voltage: 240V, 1-Phase
  • Current: 34 Amps

6400 Watt IR

  • Drying Area: 4″ x 16″
  • Voltage: 240V, 1-Phase
  • Current: 27 Amps

4000 Watt IR

  • Drying Area: 4″ x 10″
  • Voltage: 240V, 1-Phase
  • Current: 17 Amps

Options

Speed Following

Allows Walco System feeders & transports to maintain matching belt speeds, using one speed control.

Upstream Product Interlock Sensor

The interlock allows the dryer to turn on only while product is flowing. This helps increase belt life, bulb life and reduce energy consumption.

Upstream Stop Interlock

This option allows the dryer base to stop other equipment ahead of it.

Dryer Bases 350D 240D
IR (Infrared)
4000W x x
6400W x
8000W x
NIR (Near Infrared)
2400W x x
6480W x x
9720W x

NIR (Near Infrared) Dryers

NIR is cost effective high output drying systems designed for inkjet systems. This new breed of dryers offer greater productivity with reduced operating costs compared to traditional drying systems.

  • Faster Line Speeds
  • Higher Energy Wave Lengths
  • Lower Electrical Consumption Over IR
  • Lower Belt &Machine Temps.

9720 Watt NIR

  • Drying Area: 4.25″ x 16″
  • Voltage: 240V, 1-Phase
  • Current: 40.5 Amps

6480 Watt NIR

  • Drying Area: 4.25″ x 10″
  • Voltage: 240V, 1-Phase
  • Current: 27 Amps

2400 Watt NIR

  • Drying Area: 3″ x 6″
  • Voltage: 240V, 1-Phase
  • Current: 10 Amps

240D Inkjet Drying System

The series 240D is a complete compact drying system. Quality components featuring durable full frame construction. The upstream product detection provides energy savings and extends transport component life.

Features

  • Full Frame Construction
  • Triple Safety Interlocks With Operator E-Stop
  • Integrated Temperature Control
  • 12″ Wide Steel Transport Rollers
  • Center Table Vacuum
  • Variable Speed Transport
  • Adjustable Heat Belts

IR Dryers

  • Faster Line Speeds
  • Prolonged Lamp Life
  • Utilizes High Efficiency Infrared Lamps

8000 Watt IR

  • Drying Area: 5″ x 16″
  • Voltage: 240V, 1-Phase
  • Current: 34 Amps

6400 Watt IR

  • Drying Area: 4″ x 16″
  • Voltage: 240V, 1-Phase
  • Current: 27 Amps

4000 Watt IR

  • Drying Area: 4″ x 10″
  • Voltage: 240V, 1-Phase
  • Current: 17 Amps

Options

Speed Following

Allows Walco System feeders & transports to maintain matching belt speeds, using one speed control.

Upstream Product Interlock Sensor

The interlock allows the dryer to turn on only while product is flowing. This helps increase belt life, bulb life and reduce energy consumption.

Upstream Stop Interlock

This option allows the dryer base to stop other equipment ahead of it.

Dryer Bases 350D 240D
IR (Infrared)
4000W x x
6400W x
8000W x
NIR (Near Infrared)
2400W x x
6480W x x
9720W x

NIR (Near Infrared) Dryers

NIR is cost effective high output drying systems designed for inkjet systems. This new breed of dryers offer greater productivity with reduced operating costs compared to traditional drying systems.

  • Faster Line Speeds
  • Higher Energy Wave Lengths
  • Lower Electrical Consumption Over IR
  • Lower Belt &Machine Temps.

9720 Watt NIR

  • Drying Area: 4.25″ x 16″
  • Voltage: 240V, 1-Phase
  • Current: 40.5 Amps

6480 Watt NIR

  • Drying Area: 4.25″ x 10″
  • Voltage: 240V, 1-Phase
  • Current: 27 Amps

2400 Watt NIR

  • Drying Area: 3″ x 6″
  • Voltage: 240V, 1-Phase
  • Current: 10 Amps

655VT-28W Plow Fold Transport

The Walco Systems Plow Fold Transport provides a powerful solution to folding self mailers and brochures.  A simple yet effective design allows for a fluid fold of perforated or scored paper products.  The hinged design provides easy access for maintenance, while maintaining all of your set-ups, reducing down-time.

Features

  • Full Frame Construction
  • Adjustable Infeed Product Guides
  • Adjustable Infeed Rollers
  • Feeder Interlock Switch
  • Safety Interlocks
  • Adjustable Belts
  • Wide Vacuum Belt
  • 21″ Wide Steel Transport Rollers
  • Integrated VSC Conveyor Controls
  • Independent Vacuum Control
  • Variable Speed Transport

Options

Speed Following

Allows Walco System feeders & transports to maintain matching belt speeds, using one speed control.

F110E Series Friction Feeder

Specifications:

  • Material Size: Min. 2″W x 4″L – Max. 11″W x 18″L
  • Material Thickness: 1.125″ Max (Standard)
  • Electrical: 110 VAC 1-Phase 5 Amp Circuit
  • Interlock: Dry Contact (Low Volt) Standard
  • Physical: 18.1″L x 15.0W x 21.25″H

    A new contender in the budget friction feeder market has arrived!  The Walco Systems F110E features a simple and robust design capable of feeding a wide variety of products.  Adjustable belts and separator provide an exceptional degree of setup precision. Sealed shaft locking collar bearings provide low maintenance costs, and friction belt change is a snap. A range of options are available, such as an acceleration table, and seamless integration with standard Walco Systems equipment.

Like all Walco Systems products, the Evolution series feeders are designed for the high capacity use demanded by today’s commercial environment.

Features:

  • Quick and Easy Setup
  • Variable Speed
  • Independently Adjustable Belts & Separator
  • Dual Durometer Separator
  • Adjustable Exposure Table
  • Simple Under 5 Min. Belt Replacement
  • Feeds Wide Variety of Products
  • High Capacity Feed Hopper
  • Heavy Gauge Steel Construction
  • Rotatable Separator
  • Sealed Shaft Locking Collar Bearings
  • Magnetic Rear Adjustable Roller Wedge

Options:

Articulating Acceleration Assembly
 
Creates separation between pieces before
leaving the feeder.
 
Remote Speed POT
 
Feeder Speed control POT located on a Walco
transports base, allows feeder speed control
from the same location as transport base and
conveyor speed.

Speed Following

Allows Walco Systems feeders to follow
transports base belt speeds, using one speed control.

VF400 High Speed Commercial Vacuum Friction Feeders

Employing every concept that makes up the VF200, the VF400 ups the ante and allows for wider pieces to be fed. Designed primarily for cardboard, this machine allows products to contact 180 square inches of natural gum rubber belting.

Specifications

VF400

Material Size: Min. 3″W x 5″L – Max 41″W x 28″L
Material Thickness: 1″ Max (In Standard Configuration)
Electrical: 110 VAC 1-Phase 5 Amp Circuit
Interlock: Dry Contact (Low Volt) Standard
Operator Controls: Power (on/off), Vacuum (on/off), Stop, Jog, Start, Feed Speed
Physical: 24″L x 50.5″W x 33-36″ H

Feeds

  • Bags
  • Envelopes
  • Heavy Card Stocks
  • Corrugated Cardboard
  • Jewel Cases
  • Perfect Bound Books
  • Calendars
  • Sheet Stocks

Options

Speed Following

Allows Walco Systems feeders & transports to maintain matching belt speeds, using one speed control.

Demand Feed

Allows Walco Systems feeders to feed one piece on a demand signal.

VF200 High Speed Commercial Vacuum Friction Feeders

The VF200 offers a radically innovative design not available anywhere else.

Every part in this feeder – from the precision machined guides, to the sealed shaft locking collar bearings – was designed to take an outstanding amount of abuse. Over 50 inches of two (2) 2-1/2 inch wide belts offer an astonishing amount of friction.  Add vacuum to the equation and you have a machine capable of pulling any product.

Like all Walco Systems products, the Evolution series feeders are designed for the high capacity use demanded by today’s commercial environment.

Specifications

VF200

Material Size: Min. 3″W x 5″L – Max 19.5″W x 28″L
Material Thickness: 1″ Max (In Standard Configuration)
Electrical: 110 VAC 1-Phase 10 Amp Circuit
Interlock: Dry Contact (Low Volt) Standard
Operator Controls: Power (on/off), Vacuum (on/off), Stop, Jog, Start, Feed Speed
Physical: 24″L x 23.5″W x 33-36″ H

Features

  • Quick and Easy Setup
  • Variable Speed Transport
  • Adjustable Infeed Product Guides
  • Ergonomic Operator Panel
  • Feeds Wide Variety of Products
  • High Capacity Feed Hopper
  • Independently Controlled Self-Contained Vacuum
  • Non-Proprietary Components

Uncompromising Drive Train

  • High Torque Gear Drive Motor
  • Steel Drive Pulleys
  • 12″ Wide Steel Rollers
  • Large Diameter Steel Shafts
  • Sealed Shaft Locking Collar Bearings

655VFT Commercial Vacuum Friction Feeder and Transport System

The permanently integrated design of the 655VFT allows for impressively quick set-ups of a very wide range of work pieces. One control panel operates both feed and transport sections, making setup easier.  Like all Walco Systems LLC products, the 655VFT exceeds the high capacity use demanded by today’s commercial environment.

F100E/350IJ Commercial Budget Beater

Don’t let this entry level inkjet system fool you.  It delivers huge productivity in a small footprint – and leaves some extra in your budget.  The equipment in this system uses the same high quality components as in every piece of Walco Systems machinery.

Rebuilt Equipment

Quality Used, Rebuilt Mail Processing Equipment & Mailing Machines Roberts Business Machines has over 30 years experience in the automated mail processing equipment industry. We use OEM parts in our on-site rebuilding facility and are fully trained, factory authorized service …